8/3 Emirali Road, Silverdale
8am - 5pm
DIY PRODUCTS & TRADE SOLUTIONS
Browse Categories
SKU: CNP-ORG5L

Original price was: $299.90.Current price is: $269.90.

Take the guesswork out of weed control with Cut’n’Paste Original Weedkiller Gel 5L. This targeted glyphosate gel is applied directly to freshly cut stumps or selected leaves, helping eliminate weeds without overspray or damaging surrounding plants. Ideal for large-scale weed control, conservation projects, contractors and property owners who need precise, effective results.

  • Targeted, non-spray weed control
  • Ideal for freshly cut stumps and leafy weeds
  • Helps protect nearby native and desirable plants
  • Thick gel formula stays where it’s applied
  • Suitable for large-scale weed control projects
  • Trusted by councils, DoC and professional contractors throughout New Zealand

Available on back-order

Cut’n’Paste Glyphosate Original Weedkiller Gel 5L

Target Weeds with Precision

Cut’n’Paste Original Weedkiller Gel 5L provides a simple, effective way to control invasive weeds without the risks associated with spraying.

Instead of spraying chemicals across large areas, the thick gel is applied directly onto freshly cut stumps or wiped onto the underside of selected leaves. This targeted application helps minimise chemical use while reducing the risk of drift onto surrounding plants.

Whether you’re clearing woody weeds, treating invasive shrubs or managing large areas of leafy weeds, Cut’n’Paste Original offers precise weed control with minimal impact on the surrounding environment.

Key Benefits

  • Targeted weed control without spraying
  • Thick gel stays where you apply it
  • Ideal for freshly cut stumps and leafy weeds
  • Helps reduce spray drift and chemical waste
  • Suitable around native planting and sensitive environments
  • Excellent for conservation work and revegetation projects
  • Large 5L size ideal for contractors and large properties
  • Trusted throughout New Zealand by professional vegetation managers

How It Works

Unlike traditional herbicide sprays, Cut’n’Paste Original uses a thick glyphosate gel that is applied directly onto the weed.

Freshly Cut Stumps

Simply:

  1. Cut the weed approximately 50mm above ground level.
  2. Immediately apply a generous layer of gel across the freshly cut surface.
  3. Cover the outer cambium layer and a small amount of surrounding bark.
  4. Allow the gel to absorb into the plant.

The glyphosate is drawn into the root system, helping prevent regrowth.

Leafy Weeds

For herbaceous or creeping weeds:

  • Apply a small amount of gel to the underside of approximately 10% of the actively growing leaves.
  • The herbicide is absorbed through the leaf and transported throughout the plant.

This method works particularly well on large leafy weeds where spraying may not be practical.

Ideal For

Cut’n’Paste Original Weed Gel is ideal for controlling:

  • Freshly cut tree stumps
  • Shrubs
  • Woody weeds
  • Herbaceous weeds
  • Creeping weeds
  • Conservation projects
  • Native planting areas
  • Large rural properties
  • Lifestyle blocks
  • Commercial vegetation management

Suitable Weeds

Common weeds treated include:

  • Inkweed
  • Boneseed
  • Convolvulus
  • Wandering willy
  • Small woody weeds
  • Many invasive shrubs
  • Freshly cut tree stumps

Why Choose a Weed Gel?

Traditional herbicide spraying isn’t always practical.

Cut’n’Paste Original allows you to treat only the weeds you want removed.

Benefits over spraying

  • No spray drift
  • Reduced risk to surrounding plants
  • Less herbicide wastage
  • Greater precision
  • Excellent for difficult-to-access areas
  • Ideal around native vegetation
  • Safer application in sensitive environments

Coverage & Application

Coverage depends on the size and number of weeds being treated.

As a guide:

  • Apply approximately a 3mm layer across the entire freshly cut stump surface.
  • For leafy weeds, wipe a small amount onto the underside of approximately 10% of the actively growing leaves.

The 5L container contains approximately 11 times the volume of the standard 450ml bottle, making it an excellent choice for:

  • Contractors
  • Councils
  • Large rural properties
  • Conservation work
  • Extensive weed infestations

Active Ingredient

  • 120g/L Glyphosate IPA
  • Contains only 0.5% APG (Alkyl Polyglucoside) surfactants, helping improve absorption while maintaining low animal toxicity.

Trusted Throughout New Zealand

Cut’n’Paste Original is widely used throughout New Zealand by:

  • Homeowners
  • Lifestyle block owners
  • Landscapers
  • Arborists
  • Councils
  • Department of Conservation (DoC)
  • Line companies
  • Vegetation management contractors

Its targeted application makes it particularly suitable around native planting, riparian areas and environmentally sensitive sites.

Important Safety Information

  • Always read and follow the product label before use.
  • Wear suitable protective gloves during application.
  • Avoid contact with desirable plants.
  • Apply immediately after cutting stumps for best results.
  • Store securely out of reach of children and animals.

Why Buy from Pestrol?

Pestrol has been supplying effective weed control solutions to New Zealanders for over 20 years.

Whether you’re tackling a few invasive weeds around the garden or managing large-scale vegetation projects, Cut’n’Paste Original Weedkiller Gel offers a precise, reliable and easy-to-use solution without the need for widespread spraying.

FAQs

What is Cut'n'Paste Original Weed Gel used for?

It is designed for targeted control of freshly cut tree stumps, shrubs and many leafy weeds without the need for spraying.

Can I use it around native plants?

Yes. Because the gel is applied directly to the target weed, it helps reduce the risk of damaging nearby native or desirable plants when used correctly.

Does it work on leafy weeds?

Yes. Simply wipe a small amount onto the underside of approximately 10% of the actively growing leaves for effective uptake.

How soon should I apply it after cutting a stump?

For best results, apply the gel immediately after cutting while the stump is still fresh.

How much area will the 5L container cover?

Coverage depends on the size and number of weeds being treated. The 5L container contains approximately 11 times the volume of the standard 450ml bottle, making it suitable for large-scale weed control projects and extensive infestations.

Weight 7 kg
Dimensions 0.36 × 0.28 × 0.18 m

Reviews

There are no reviews yet

Add a review
Cut’n’Paste Glyphosate Original Weedkiller Gel 5L Cut’n’Paste Glyphosate Original Weedkiller Gel 5L
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required

Q & A

Ask a question
Cut’n’Paste Glyphosate Original Weedkiller Gel 5L Cut’n’Paste Glyphosate Original Weedkiller Gel 5L
Your question
* Question is required
Name
* Name is required
There are no questions yet