Looking for a strong, flexible adhesive for close-fitting surfaces? Selleys Kwik Grip Horizontal is a heat-resistant, solvent-based contact adhesive that provides an instant bond when two surfaces come into contact. Perfect for both interior and exterior applications, it’s ideal for bonding timber veneers, laminated plastics, and more.

Features:

• Heat Resistant: Withstands temperatures up to 130°C.
• Water Resistant: Suitable for both interior and exterior use.
• Instant Grab: Bonds immediately on contact.
• Chemical Resistance: Resists dilute acids and alkalis.
• Easy to Apply: Spreads easily for a smooth finish.

Where to Use:

• Veneers and Laminated Plastics: Bonding timber veneers and plastics like Laminex and Formica to benchtops and tables.
• General Bonding: Ideal for a wide range of materials including cork, rubber, leather, metals, and hardboard.
• Outdoor Applications: Use on tents, outdoor gear, vinyl flooring, and more.

Suitable Materials:

• Cork
• Rubber
• Felt
• Canvas
• Leather
• Metals
• Timber
• Laminated Plastics (Laminex, Formica)
• Hardboard
• Compressed Board

How to Use:

1. Prepare Surfaces: Clean and dry all surfaces to remove any oils, grease, or contaminants.
2. Apply Adhesive: Apply a thin, even layer of Kwik Grip to both surfaces.
3. Dry Time: Keep surfaces apart until the adhesive is touch-dry (approx. 20–40 minutes).
4. Position and Press: Once dry, align the surfaces and press firmly together.
5. Secure: Use a roller or hammer with a padded block to ensure a secure bond. Full strength is reached in 24 hours.

Limitations:

• Not suitable for rough, ill-fitting surfaces.
• Not recommended for polyethylene or polypropylene plastics.
• Avoid using in temperatures below 10°C.
• Not for use with gasoline or distillates.

Handy Tips:

• Wet Bonding: For small, porous areas, apply Kwik Grip to one surface and clamp until dry.
• Surface Compatibility: Always test in an inconspicuous area for compatibility with vinyl, polystyrene, or other sensitive materials.
• For Vertical Surfaces: Use Selleys Kwik Grip Vertical Gel for better adhesion.
• Low Ventilation Areas: For confined spaces, use Selleys Kwik Grip Waterbased, which is non toxic and odorless.

Clean-Up:

• Uncured Adhesive: Clean with xylene.
• Cured Adhesive: Can be removed by sanding or scraping.

Important Notes:

• Kwik Grip contains flammable solvents, so take proper fire precautions. For non flammable use, consider Selleys Selleys Kwik Grip Waterbased.
• Always ensure that surfaces are properly prepared for the best bond.

Selleys Kwik Grip Horizontal is a versatile adhesive that works quickly and effectively for a range of bonding applications, offering lasting results for both indoor and outdoor projects.