Spare Parts & Accessories

The Gardena Blade Kit includes 9 blades and 9 fastening screws, providing enough parts for 3 full blade replacements for your robotic lawnmower.

Blades should be replaced when they become dull or damaged. Typically, this could be after several months of use, depending on your lawn conditions.

Yes, the Gardena Blade Kit is designed to work with all models of Gardena robotic lawnmowers, ensuring compatibility and optimal performance.

The kit comes with 9 fastening screws. Simply remove the old blades and attach the new ones using the included screws for quick and easy installation.

Original Gardena blades are designed for the best performance with Gardena robotic mowers. Using non-original parts may affect the mower’s efficiency and warranty.

The lifespan of the blades depends on the frequency of use and the condition of your lawn. For optimal results, replace the blades as needed for a sharp, clean cut.

These blades are designed specifically for mowing and mulching with your GARDENA robotic lawnmower and should not be used for other purposes.

Yes, replacing the blades is a simple process. The included screws make installation quick and easy, allowing you to maintain your mower effortlessly.

The kit includes O-rings and flats designed to restore the watertight seal of Gardena Maxi-Flo™ Tap Nut Adapters (Art. No. G2801 and G2802).

Simply replace the old washers with the new ones included in the kit. The installation process is quick and easy.

Not necessarily. The Washer Set restores the watertight seal, eliminating the need for a full adapter replacement.

The Washer Set is specifically designed for the Gardena Maxi-Flo™ Tap Nut Adapters (Art. No. G2801 and G2802).

When installed correctly, the washers provide long-lasting reliability, ensuring your Maxi-Flo™ system continues to perform without leaks.

The kit is designed specifically for the Maxi-Flo™ Tap Nut Adapters and may not be compatible with other Gardena products.

The extension cable is 10 meters long, but it can be extended up to 105 meters in total.

Yes, the extension cable features a simple plug connection, making installation quick and hassle-free.

Yes, the cable provides a stable connection even when installed underground, ensuring reliable performance.

It allows you to position your Gardena Soil Moisture Sensor further from your Water Control, providing more flexibility.

Yes, the 10m Extension Cable is fully compatible with all Gardena Soil Moisture Sensors.

Yes, you can connect multiple extension cables to achieve the desired total length, up to 105 meters.

It is used to replace washers and O-rings in G901, G902, and G903 Tap Nut Adapters to ensure a leak-proof seal.

The kit is designed for G901, G902, and G903 Tap Nut Adapters.

No, the washers and O-rings can be easily installed without any tools.

Yes, after installation, the washers and O-rings restore a 100% leak-proof seal, preventing water wastage.

If your tap nut adapters are leaking or not sealing properly, it’s time to replace the washers and O-rings.

The kit is made from high-quality materials for durability, providing long-lasting, reliable sealing performance.

The kit is specifically designed for the G901, G902, and G903 Tap Nut Adapters.

To replace the globes on your Dominator Multi Insect Trap, first remove the clear plastic covers from the ends of each globe. To do so, undo the small black screw and pull the cover off. Once that's removed twist the globes about 90 degrees until you hear a click and pull them out of their holds. Once the old globes are removed, place the new ones in the same place and twist again 90 degrees until you hear it click into place. Once the globes are in, you can now place that cover back on each end of the globes.

The pack includes two replacement bulbs designed specifically for the Pestrol Dominator Multi Insect Trap.

Simply remove the old bulb and replace it with a new one. It’s quick and easy to install.

The bulbs are designed for long-lasting performance. The lifespan will depend on usage and environment but typically lasts for several months.

No, these bulbs are specifically designed for the Pestrol Dominator Multi Insect Trap and may not work with other models.

Yes, the bulbs attract a variety of flying insects, including mosquitoes, flies, and moths.

The replacement bulbs are currently available only in a 2-Pack.

Dispose of the used bulbs following local guidelines for safe disposal of electronic components.

Simply unplug the trap, remove the old bulb, and insert the new replacement bulb. Ensure it’s securely in place before plugging the trap back in.

Typically these bulbs last on average 5000 hours, 4-6 months, depending on usage and environmental conditions.

Yes, the bulb is designed to consume less energy while providing effective mosquito attraction.

No, this replacement bulb is specifically designed for the Pestrol Mosquito Eater Trap and may not work effectively in other traps.

No, these glueboards are specifically designed for use with the Pestrol Stainless Steel Fly Trap only.

We recommend replacing the glueboard every 3 months or when it is full of flies.

The glueboards have a shelf life of up to 3 years when stored properly.

The glueboards are sold in packs of 5.

These glueboards are best used indoors or in sheltered areas for optimal performance.

Simply remove the old glueboard and insert a new one into the Pestrol Stainless Steel Fly Trap.

Yes, the glueboards are safe to handle. Just avoid contact with the sticky surface to prevent residue from transferring.

This replacement tube fits Aura Fly Units

Dual peak wavelength of 368nm–540nm ensures maximum attraction of flying insects.

Switch off the unit, remove the old tube, insert the replacement, and secure the front cover.

For maximum efficiency, replace annually even if it still glows. UV output diminishes over time.

UV output diminishes over time, reducing fly attraction even if the tube still emits visible light.